Grammarly Plagiarism Detector vs Turnitin vs DrillBit (2026)

Grammarly Plagiarism Detector vs Turnitin vs DrillBit (2026)

You have run a chapter through the Grammarly plagiarism detector, it came back clean, and now you are wondering whether the university’s check will say the same. Often it will not. The Grammarly plagiarism detector compares your text with web pages and ProQuest’s academic databases; the report that goes into an Indian thesis file is usually produced by DrillBit or Turnitin, which search different collections, including previously submitted theses. This comparison shows what each tool sees, where each falls short, and which one you should trust before submission.

Want the chapter skeleton in front of you while you fix citations? Open Tesify: it helps you structure your thesis chapter by chapter, and every word stays 100% written by you.

Grammarly plagiarism detector vs Turnitin vs DrillBit at a glance

Tool What it compares your text with Typical access for an Indian scholar Best use in a thesis Main limitation
Grammarly plagiarism detector Billions of web pages plus ProQuest’s academic databases Personal account; detailed matches need a paid plan Catching passages you forgot to cite while drafting Not the software your university uses for formal screening
DrillBit Web content, journal content from publishers such as Wiley, IEEE and Taylor & Francis, Crossref and Shodhganga coverage Through your university under INFLIBNET’s ShodhShuddhi programme The pre-submission and formal thesis check in many Indian universities You usually cannot run it yourself; the library does
Turnitin (Similarity Report) Turnitin’s own collections of web content, publications and previously submitted papers Through a university or journal licence Universities with their own licence; journal submissions Access depends entirely on your institution

The column that matters most is the second one. A similarity score is only as meaningful as the collection it is measured against. Text copied from an older Indian thesis may be invisible to one tool and obvious to another.

What does the Grammarly plagiarism detector actually check?

According to Grammarly’s plagiarism checker page, the tool checks your text against billions of web pages and against ProQuest’s academic databases. The basic check tells you whether duplicate content was found. Grammarly’s paid plan goes further: it highlights the passages that need citations and shows the matching sources, which is the part a scholar actually needs.

That makes Grammarly useful as a drafting habit. If you paste a paragraph of your literature review and it flags a match, you have probably reproduced a source’s wording too closely or forgotten a citation. Fix it while the source is still open on your desk.

Where does Grammarly fall short for an Indian thesis?

  • Different collections. Your university’s software may hold Indian theses, institutional repositories and earlier student submissions that Grammarly’s sources do not cover.
  • Different exclusions. The UGC regulation excludes references, the bibliography, the table of contents, the preface, acknowledgements and properly quoted material from the similarity count. Grammarly does not apply your university’s exclusion settings.
  • Different numbers. A Grammarly originality score is not a UGC similarity percentage, and examiners will not accept it in place of the report from your institution.
Scholar marking passages on a printed chapter with a highlighter
Scholar marking passages on a printed chapter with a highlighter

Why DrillBit is often the report that counts

Under ShodhShuddhi, the Ministry of Education programme run by INFLIBNET, eligible institutions receive plagiarism detection software. The ShodhShuddhi page records that INFLIBNET provided Ouriginal (formerly Urkund) from September 2019 to 30 September 2023 and DrillBit-Extreme from 1 October 2023. DrillBit’s own site describes it as the technology behind ShodhShuddhi and lists coverage of publisher content from Wiley, IEEE and Taylor & Francis, and of Crossref and Shodhganga.

The Shodhganga coverage is the reason a self-check elsewhere can mislead you. If your review of literature leans heavily on earlier Indian theses, a match against one of them will show up in DrillBit but may not appear in a web-and-journal check.

What the UGC similarity levels mean for each report

The UGC (Promotion of Academic Integrity and Prevention of Plagiarism in Higher Educational Institutions) Regulations, 2018 set four levels: up to 10% (Level 0, minor similarities, no penalty), above 10% to 40% (Level 1, revised script within a period not exceeding six months), above 40% to 60% (Level 2, debarred from submitting a revised script for one year) and above 60% (Level 3, registration cancelled). These levels apply to the report your institution produces under its own procedure, not to a figure you obtained from a personal tool. For the detail, see what the UGC plagiarism limit means for a PhD thesis.

University library computer lab where theses are checked
University library computer lab where theses are checked

Ranked shortlist for a scholar about to submit

1. Your university’s DrillBit or Turnitin pre-check

Suits: anyone within two months of submission. Ask the library or research cell whether they run pre-submission checks and how many attempts you get. Falls short: limited attempts and queues near deadlines, so book early.

2. Grammarly’s paid plagiarism check, used while drafting

Suits: scholars who already have a Grammarly subscription and want to catch citation gaps chapter by chapter. Falls short: it does not replicate your university’s collections or exclusion settings.

3. Grammarly’s basic check

Suits: a quick yes or no on a paragraph. Falls short: without the matched sources you cannot tell what to fix, so it is of limited use for a thesis.

4. Unknown online checkers

Suits: nobody with an unpublished thesis. You lose control of your text, and the score will not match your university’s. Falls short: on confidentiality and reliability.

Our recommendation: use Grammarly, if you already pay for it, as a drafting aid, and treat your university’s DrillBit or Turnitin pre-check as the only number that predicts your formal result.

How to use a self-check without fooling yourself

  1. Check chapter by chapter, early. Run each chapter as you finish it, not the whole thesis the week before submission. Expected output: a short list of passages to rewrite or cite.
  2. Fix the cause, not the score. For every flagged passage decide: is this a quotation (add quotation marks and a citation), a paraphrase that stays too close (rewrite from your notes) or a common phrase (leave it)?
  3. Keep a citation log. Record each source you rewrite from, with page numbers. Our guide to citing in APA style for an Indian thesis covers the format.
  4. Do not run your chapters through rewriting tools. Automated rewording produces unnatural prose and can raise questions on AI writing reports. Our explainer on bringing a similarity report back under the UGC limit shows the manual method.
  5. Book the official pre-check. Submit the cleaned chapters to your library’s check and read that report, not the self-check, as your baseline.

A worked example (illustrative)

An M.Phil scholar in commerce pastes her review of literature into Grammarly and sees no matches. Two weeks later the library’s DrillBit pre-check shows 18% similarity, most of it from two earlier theses on Shodhganga whose literature reviews she had used as a guide to sources. She had not copied them deliberately, but several summary sentences followed their wording closely. She rewrites those summaries from the original journal articles, cites the earlier theses where she used their argument, and the second pre-check comes back at 7%. The lesson is not that Grammarly failed. It searched different collections from the ones her university uses.

Which thesis sections trigger the most matches?

Across disciplines, matches cluster in predictable places. Knowing them lets you aim your self-check where it is most useful instead of pasting the whole thesis in one go.

Section Why it attracts matches What to do while drafting
Introduction and background Definitions, policy descriptions and statistics are often lifted from reports and websites Quote short definitions with a citation; describe policies in your own words and cite the official document
Review of literature Summaries of studies borrowed from abstracts or from earlier theses Summarise from the full paper, in your own order: aim, sample, method, finding, relevance to you
Theoretical framework Standard descriptions of well-known theories Cite the original theorist; explain how the theory applies to your variables, which is necessarily your own text
Methodology Textbook definitions of designs, sampling methods and tests Keep definitions brief and cited; spend the words on what you actually did
Results and discussion Rarely a problem, because the findings are yours Compare with earlier studies by citing them, not by reusing their sentences

Notice that the results and discussion rarely cause trouble. The UGC regulation’s note says the core of the research, including the hypothesis, observations, results, conclusions and recommendations, should be based on original work, and in practice those are the sections where your own data keeps the writing original.

How to read a match, whichever tool shows it

Every similarity tool, Grammarly’s paid check, DrillBit and Turnitin alike, shows you a highlighted passage and a source. The decision about what to do is the same in all three:

  1. Open the source. Compare the highlighted sentence with the original. Expected output: you know whether you quoted, paraphrased closely or happened to use a common phrase.
  2. Classify the match. A quotation without marks needs quotation marks and a citation. A close paraphrase needs rewriting from your notes. A common phrase, a standard term or a title of an Act can be left.
  3. Check the citation is there. A properly cited paraphrase can still match a few words, and that is acceptable; an uncited one is the real problem.
  4. Record what you changed. Keep a short log of passages you rewrote and why. If a question comes up later, the log shows that you fixed the cause.

The point of this routine is that it does not depend on which tool you use. If you apply it to every chapter while drafting, the formal report at the end tends to hold no surprises.

What about AI writing checks?

Similarity and AI writing are separate questions. DrillBit lists an AI content detection product alongside its similarity checking, and Turnitin offers an AI writing indicator to institutions that switch it on. Neither is part of the UGC 2018 similarity levels, which were written about matched text. If your university reports an AI score as well, ask your research cell what the score is used for, and keep dated versions of every chapter: they are the simplest proof that the writing is yours. Do not try to lower either score with rewriting tools; rewrite flagged passages yourself.

Keep the structure clear and the words yours

Most similarity problems start in the review of literature, when a scholar writes from other people’s summaries instead of from their own notes. A clear chapter structure, with the themes you will cover laid out before you write, makes it easier to write every paragraph from your own reading. Tesify helps you structure your thesis chapter by chapter; it has been used by 50,000+ students across 230,000+ chapters, and every word stays 100% written by you. Start structuring your thesis in Tesify.

Frequently asked questions (FAQ)

Is the Grammarly plagiarism detector accepted by Indian universities?

Not as the formal check. Universities screen theses with the software they license, often DrillBit under ShodhShuddhi or Turnitin. A Grammarly result is a personal drafting aid.

What does Grammarly compare my text with?

Grammarly says its checker compares text with billions of web pages and with ProQuest’s academic databases.

Why did Grammarly show no plagiarism but DrillBit did?

They search different collections. DrillBit lists coverage of Shodhganga and of publisher journal content, so matches to earlier Indian theses can appear there and not in a web-and-ProQuest check.

Does a low Grammarly score mean I am under the UGC 10% level?

No. The UGC levels apply to your institution’s report under its own exclusions, not to a personal tool’s score.

Which parts of the thesis are excluded from the UGC similarity check?

Quoted work with attribution; references, bibliography, table of contents, preface and acknowledgements; and generic terms, laws, standard symbols and standard equations.

Can I run DrillBit myself?

Usually not. DrillBit access is normally through your university library or research cell, which runs the check and shares the report.

Is Turnitin better than DrillBit?

For your thesis, the better tool is the one your university uses, because that report is the one your submission is judged by.

Should I use a paraphrasing tool to reduce matches?

No. Rewrite flagged passages yourself from your notes and cite properly. Automated rewording creates new problems.

Does Tesify check plagiarism?

No. Tesify helps you structure your thesis chapter by chapter so that you write it yourself; similarity checks go through your university’s software.